Care should be taken to avoid
touching heating elements.
If a stationary cooktop is not
provided with a supply cord and a
plug or by other means of
disconnection from the supply
having an air gap contact the
separation in all active (phase)
conductors, the instructions shall
state that such means for
disconnection shall be incorporated
in the fixed wiring according to the
wiring rules.
Installation
IMPORTANT: The appliance must be installed by a qualified technician
according to the current local regulations and in compliance with the
manufacturer's instructions.
Electrical connection
Before connecting the appliance, make sure that the supply voltage marked on
the Rating Plate corresponds with your mains supply voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
The kitchen area should be dry and aired and equipped with efficient ventilation.
When installing the ceramic, easy access to all control elements should be
ensured.
This is a Y-type design built-in ceramic, which means that its back wall and
one side wall can be placed next to a high piece of furniture or a wall. Coating
or veneer used on fitted furniture must be applied with a heat-resistant
adhesive (min. 95°C).This prevents surface deformation or detachment coating.
The cooktop should be installed according to the manufacturer’s instructions.
Installation
of ceramic hob:
Make an opening with the dimensions given in
the diagram for the hob to be mounted on the
worktop.
Check seal for perfect fit and overall cover.
Lower the ceramic hob into place and align
correctly.
Using a standard screwdriver, tighten the
tension clamps evenly starting at the centre and
moving diagonal, until the built-in rim is tight on
the worktop.
6
