Bellelli GIO PLUS, Инструкция по эксплуатации

Страница: 19 / 22

child’s chest and pass it under the seat armrest, on the
opposite side of the inertia reel (fig. 26).
Insert it into the belt guide (B) (fig. 27).
Pass the lap section of the car seat belt under the two
armrests of the seat (fig. 28).
Tension the car seat belt well, check that there are no twists
and that it runs smoothly under the armrests of the child seat.
Close the car seat belt (fig. 29).
Warning: During the journey periodically check that the child
has not freed itself from the child seat.
How to free the child from the seat
Release the car seat belt, unthread it from the child seat and
allow it to retract.
How to remove the child seat
For the versions equipped with isofix attachment points
Release the attachment points (P) by pressing the red button
(fig. 15).
Maintenance
Take the covers off completely to wash them.
Follow the washing instructions reported on the label
attached to the fabric.
Wash plastic parts using warm water and soap. Do not use
aggressive cleaning products.
Warning: The covers are an integral part of the child seat:
the seat must not be used without the covers. The covers
must only be replaced with original spare parts.
Warranty
Warranty terms and conditions are available on the website:
www.bellelli.com.
EN
17