Bellelli Clamp, Руководство пользователя, Страница: 8 / 66

6
MOUNTING THE CHILD SEAT
Do not carry out mounting operations with the child in the seat.
Make sure you have all the components before proceeding with assembly (fig. A).
Gently pull the knob (8) towards you and turn it anti-clockwise to open the clasps on the support plate.
Place the child seat on the parcel rack (fig. B).
Warning: Check that the distance between the centre of gravity symbol printed on the outer sides of
the seat and the wheel axis is under 10 cm. Danger of tipping over.
Gently pull the knob (8) towards you and turn it completely clockwise to lock the clasps onto the parcel
rack (fig. C).
Warning: after locking the clasps, check that the child seat cannot move back and forth on the parcel rack.
Warning: Periodically check that the clasps are tight to the parcel rack: clasps can become loose
with use.
Hook the additional safety belt (1) to the bike frame (fig. D).
WARNING: the additional safety belt must always be hooked to the bike frame.
Taking the child seat off the bike
Unhook the additional safety belt (1).
Gently pull the knob (8) towards you and turn it anti-clockwise to open the clasps on the support plate.
Lift the child seat off the parcel rack.
ADJUSTING THE CHILD SEAT
Before using the seat, check to make sure that the safety belts and foot rest positions are fitted to
your child’s size.
The safety belts must be positioned just above the child’s shoulders.
The child should be able to completely rest his or her feet on the foot rests.
Do not adjust the safety belts or the foot rests while the child is in the seat.
Adjusting the safety belts
Remove the belt through the hole in the backrest.
Insert the safety belt through the hole in the backrest at the desired height (fig. E).
Repeat the same operation for the other safety belt.
Adjusting the foot rests.
Turn the locking lever (9) behind the foot rest upwards (fig. F).
Move the foot rest (11) upwards or downwards to the desired position.
Close the locking lever (9) by pushing it downwards until you hear a click.
Repeat the same operation for the other foot rest.
FINAL CHECK
Push the bicycle for several meters by hand, checking to make sure that no moving parts touch the
child seat, that none of the safety belts stick out around the wheel, and that the bicycle brakes and
pedals still work properly.
PLACING THE CHILD IN THE SEAT
Press the button on the large central buckle (2) until you hear a click showing that the hook has been
released (fig. G).
Pull upwards to extract the buckle.
Seat the child.
Pull the safety belts down over the child’s head (fig. H).
Fasten the large central buckle to the opening nearest the child (fig. I). Push the buckle all the way into
the opening until you hear a click.
EN