Bell System bellswipe, Руководство пользователя, Страница: 12 / 21

bell
swipe
Card Access System
18
System/Card Management
The following procedures describe in detail, the programming and setup
operations required to manage cards on the system. There are 3 types of card
used:
User Cards
User cards are issued to each person who is to
be given access to the protected area. They
have a signature strip on the back to record and
identify the user’s name, and on the front there
is a user number (01-20) and a 4-digit pack
number.
Shadow cards
For each user card there is a corresponding
Shadow card with an identical user and pack
number. The shadow cards are used to disable
a user card (which may have been lost or
stolen).
Function cards
Eight Function cards are provided for card and
System management, e.g. setting the lock
release time. All eight cards have the same 4-
digit pack number, which also appears on the lid
of the CR500 controller.
bell
swipe
Card Access System
19
Summary of function cards
Card Function
ENABLE CARD Enable a single user card
ENABLE GROUP Enable a group of user cards (max 20 )
ZONE 1 Restrict user card(s) to Time Zone 1
(used with ENABLE CARD or ENABLE GROUP)
ZONE 2 Restrict user card(s) to Time Zone 2
(used with ENABLE CARD or ENABLE GROUP)
LOCK TIME Set the lock release time
TEST LOCK Operate the lock release for 5 seconds
DELETE ALL Delete all user cards.
ENABLE PACK Use only under direction from the manufacturer
Enable a Starter pack (8 function cards and 16 users)