BF Apartment Station Digital Entry System
PD
–166 Issue 1
Installation and Operating Manual
Page 7 of 48
The call may be terminated by touching the
pickup
symbol again or more usually by
touching the
lock
symbol first to allow the visitor access through the entrance; the speech
and picture will persist for a further 3 seconds while the door is being released.
Silent viewing
When the apartment station is ringing the resident can touch the
view
symbol to answer
the call instead of the
pickup
symbol; this will stop the apartment station ringing and
enable them to view the visitor for up to 60 seconds or until the
lock
symbol is touched to
release the door. S
ilent viewing can be „normalised‟ at any time by touching the
pickup
symbol and conversing with the visitor as described above.
Apartment Station Controls
The diagram in the introduction shows the apartment station and its controls. The controls
are adjusted by touching the end of the slider and sliding the finger up and down. The
default setting is ringer volume halfway and contrast slider fully down.
Auto Display
When „Auto Display‟ mode is selected the picture will come on while the apartment station
is ringing, otherwise the picture will only come on when the call is answered. Auto Display
mode is usually pre-selected at installation and generally only one apartment station per
flat should be set in this mode (see „Extension Apartment Stations‟ below).
Ringer Mute
The resident can mute the ringing sound in the apartment station when they do not wish to
be disturbed. Ringer mute is activated by touching the
mute
symbol on the apartment
station, which then illuminates in red as a reminder. Touching the
mute
symbol a second
time will disengage the mute function. Ringer Mute only stops the audible ring, but the
blue ring lamp will still flash and all other functions work normally. Ringer mute will
continue for the pre-set time even if a call is answered.
During installation it is possible to set a time limit for the mute function in various values
from 2 minutes up to 10 hours or indefinitely. When this time period has elapsed the mute
function will automatically disengage. Default timeout is never (Se
e „mute timer‟, page 25).
Door Status Indication
The green
lock
lamp on the apartment station will illuminate to warn the resident that a
door has been left open following a call. This feature requires a door monitor contact to be
fitted.
Call Privacy
Once a call has been made from an entrance panel only the apartment station(s) which is /
are ringing may answer the call. Once the call is answered another apartment station will
not activate (including extensions of the active apartment station).
User Activation (CCTV Mode)
User activation is a feature of the bell
free
1 way system and is not available on digital
systems. User activation is generally not recommended on larger systems as the
conflicting demands of residents and callers can result in confusion and erroneous fault
reports.
