Bell System Practices Plant Series, Настройки, Страница: 60 / 150

SECTION 573-115-700
2. 56 Function Mechanism (Cont.)
LEFT- HAND P
(RIGHT SIDE VIEW)
Page
60
FUNCTION PAWL
(FRONT TOP VIEW)
STUNT CLIP
(FOR UNITS EQUIPPED WITH CLIPS ONLY)
REQUIREMENT
(RIGHT -HAND POSITION)
THE CLIP SHOULD NOT PREVENT THE ASSOCIATED
FUrKTION PAWL FROM ENGAGING ITS FUNCTION BAR.
TO ADJUST
POSITION THE CLIP TO ITS EXTREME RIGHT -HAND POSITION
REQUIREMENT (CENTER POSITION)'
THE CLIP SHOULD HOLD THE FUNCTION PAWL OUT OF
ENGAGEMENT WITH ITS FUNCTION BAR BUT SHOULD NOT
INTERFERE WITH THE FUNCTION LEVER.
TO ADJUST
POSITION THE CLIP WITH ITS MOUNTING SCREW LOOSENED.
REQUIREMENT (LEFT-HAND POSITION)
THE CLIP SHOULD HOLD THE FUNCTION PAWL UPWARD OUT OF
E NGAGeMENT WITH ITS FUNCTION BAR. IT SHOULD ALSO HOLD THE
TOP END OF THE FUNCTION LEVER IN ITS REAR POSITION.
TO ADJUST
POSITION THE CLIP TO ITS EXTREME LEFT -HAND POSITION.
FUNCTION BAR