17.
Speaker Button:
Press this button to answer an incoming call, place a call or end a call.
18.
VMWI LED Indicator:
It blinks to indicate message waiting in voice mailbox
19.
PROG. Button:
Used when you are registering a new handset to the base.
20.
Flash/Remote:
Press this button during off hook mode to send a timed line break to
phone line to access custom calling features such as Call Waiting or three-way calling
provided by your local phone company.
21.
Ans. On/Off Button:
Press this button to switch the TAD to answer on/off mode.
22.
TAD Operation Buttons:
Press this button to operate the answer to playback message,
skip to next message, repeat current message, back to previous message, erase current
message, erase all old message(s), record welcome message and record memo.
message.
1
2
(Figure 3)
EXTRA CHARGE CRADLE CONTROLS
1. Charge LED Indicator:
Lights up steadily when the handset is being charged on the
charge cradle. It will turn off when the handset is removed from the cradle.
2. Charge
Terminals:
Used for charging the handset battery.
MOUNTING POSITION
DESKTOP USE:
Connect the telephone line cord to the telephone line jack on the bottom of the base unit and
connect the opposite end to the telephone modular jack (wall jack).
(Figure 4)
BELT CLIP INSTRUCTION
Remove the belt clip cover and clamp the belt clip to the back of the handset as shown in
