Bell Phones Excursion 35818, Руководство пользователя

Страница: 14 / 30

2. Press DOWN button until “ RINGER TONE ” option is pointed by the pointer;;
3. Press MENU button;
4. Press UP or DOWN button to select the ringer tone (1-5) you desire;
5. Press MENU button to save the setting;
6. Press BACK button to go back to Standby mode.
AREA CODE
This telephone allows you to input your local area code, during CID list review mode, LAC will
be hidden in default display mode of the matched LAC case.
1. During Standby mode, press MENU button;
2. Press DOWN button until “
AREA CODE ” option is pointed by the pointer;;
3. Press MENU button;
4. Press 3 digits local area code;
5. Press MEUN button to save the setting;
6. Press BACK button to go back to Standby mode.
REGISTERING A HANDSET
If your handset is not registered to a base unit, or you found problem when making
communication with the base unit, you can register the handset to your base once more
unconditionally.
1. During Standby mode, press MENU button on the handset;
2. Press DOWN button until “
REGISTRATION ” option is pointed by the pointer;;
3. Press MENU button to select registration option;
4. Press MENU button to select registration of own handset;
5. Press MENU button to confirm;
6. Press and hold base unit PROG button until handset beeps;
7. Press numeric keypad to enter username by multi-tap input (max. 15characters);
8. Press MENU button to save the input.
NOTE: for the operation of multi-tap input, please refer to Telephone Keypad Characters
section for more detail.
NOTE: if you found communication problem with the base in more than one handset, please try
to deregister all handsets using the following procedures and register those handsets one by
one using the procedure described in “
REGISTERING THE HANDSET ”.
DEREGISTERING ALL HANDSETS
1. Press and hold the PROG button until In-Use LED blinks slowly (like registration);
2. Release button and then press and hold the PROG button again until In-Use LED blinks
quickly;
3. Release button and press once quickly the PROG button again, when all deregistration
procedures are completed, base will shows “ ALL HANDSETS DEREGISTERED ” and
handsets will show “ REGISTER HANDSET? ”.
DEREGISTERING A HANDSET
If you want to move a handset to work with another 35818 base, you can deregister the handset
from current base and then register to another base unit.
1. During Standby mode, press MENU button;
2. Press DOWN button until “
DEREGISTRATION ” option is pointed by the pointer;;
3. Press MENU button to select deregistration option;
4. Press MENU button to select deregistration of own handset
5. Press MENU button to confirm;
6. When deregistration is completed, handset will show “
REGISTER HANDSET? ”
TONE/PULSE
This telephone allows you to dial digits using the tone signaling mode or the old pulse signaling