Bell Phones Big Button Plus 20270, Руководство пользователя

Страница: 7 / 18

7 060512A-1
Hook switch - A switch on the handset
cradle of the base unit, which is used to
hang up or get a dial tone.
Off -Hook Indication -
The LCD panel will display the Off-
Hook icon “ ” on the first line of
the LCD panel to indicate that the
handset is Off - Hook .
One-Touch Memory Buttons
- The
Big Button Plus 20270 can store up to 3
emergency telephone numbers into
memory (up to 16 digits each), and you
can then dial any of the stored phone
numbers by just pressing one of the
emergency buttons located above the
LCD panel.
REDIAL Button -
This button allows
you to automatically dials the last phone
number dialed up to 32 digits.
SPEAKERPHONE Button - Allows
you to place and receive calls without
having to use the handset.
VOLUME Control - Used to adjust the
volume of the speaker when using the
speakerphone.
Visual Ring Indicator - flashes to alert
a person who has trouble hearing that
the phone is ringing.
BATTERY
INSTALLATION
Your unit requires 4 “AA” batteries (not
included). alkaline batteries are
recommended. The battery
compartment is located in the bottom of
the base unit. Carefully remove the
battery cover and follow the markings in
the compartment as shown below:
(Figure 1)
INSTALLATION
Desktop Use
1. Set the unit on the selected desktop
and connect the telephone line cord
to the telephone line jack on the rear
of the base unit.
2. Connect the opposite end of
telephone line cord to the
telephone modular wall jack.
3. Connect one end of the coiled
handset cord to the handset jack of
the base unit (located on the left
hand side of the base) and the other
end to the handset jack of the
handset.
Wall Use
(with a standard AT&T or GTE modular wall jack)
1. Connect the short telephone line
cord to the telephone line jack on
rear of the base unit.
2. Connect the opposite end of the
short telephone line cord to the
telephone modular wall jack.
3. Align the wall mounting slots with
the studs located on the modular
wall plate and slide the base down
to lock in place. See figure 1.
Wall
Mounting
Slots
Battery
Compartment