Bell Phones Big Button Plus 20270, Руководство пользователя

Страница: 11 / 18

11 060512A-1
Chain dialing
Chain dialing is useful if you need to
access numbers other than telephone
numbers (such as bank account numbers
or access codes) from the directory,
speed dial locations or call history.
1. Lift the handset or press
SPEAKER .
2. Wait for a dial tone. Dial the first
number. You can do this manually,
from the directory or the call history.
3. To dial a number (up to 48 digits):
From the directory:
a. Press DIRECTORY.
b. Press CALL LIST or
CALL LIST to scroll to
REVIEW. Press OPTIONS.
c. Press CALL LIST or
CALL LIST to scroll to the
desired entry.
d. Press DISPLAY DIAL . The
telephone will automatically
dial the displayed number.
From the call history:
a. Press CALL LIST or
CALL LIST to scroll to
the desired entry.
b. Press DISPLAY DIAL . The
telephone will automatically
dial the displayed number.
Flash/ call waiting
If you subscribe to call waiting service
with your telephone service provide,
you can answer a new incoming call
without losing your current call.
1. While on a call, press
FLASH to
connect to the new call when you
receive a call waiting signal.
2. Press FLASH again to return to the
original call.
NOTES :
Use FLASH to access other
subscriber services, as described by
your telephone service provider.
The telephone cannot display the
caller ID information if another
telephone on the same line is in use.
Make sure all extensions are not in
use.
Mute
Press MUTE to prevent the other party
from hearing you. You will still be able
to hear the other party. Press
MUTE
again to return to your two-way
conversation.
Ringer switch
Use the ringer switch on the base to
adjust the ringer
ON or OFF . If the
ringer switch is set to OFF , this
telephone will not ring when there is an
incoming call. However, the
CALL
INFO indicator will still flash to
indicate an incoming call.
Call info
The CALL INFO indicator on the
telephone is used to indicate there is
additional information in the display
about the current or previous calls.
Directory operation
Directory memory capacity
This telephone has a directory where
you can store up to 25 additional
telephone numbers and names. Numbers
can be up to 24 digits long and names
can be up to 15 characters.
Directory entries are stored in
alphabetical order.You may wish to enter
names with the last name first to
maintain consistency with information
stored through the caller ID features of
this telephone.
Press
CLEAR at any time to exit the
directory without saving changes and
return to the idle screen.
NOTE: Entries cannot be edited after
the screen displays STORED .
Store numbers and names in the
directory