Bell Phones 31331 Скачать руководство пользователя страница 5

 

 

 

 

 
 
 
 
 
 
 
 

4

SAVE THESE INSTRUCTIONS

 

 

          

IMPORTANT SAFETY 

           INSTRUCTIONS 

 
When using your telephone equipment, 
basic safety precautions should always 
be followed to reduce the risk of fire, 
electric shock, and injury to persons, 
including the following: 
1.  Read and understand all 

instructions. 

2.  Follow all warnings and instructions 

marked on the product. 

3.  Unplug this product from the wall 

outlet before cleaning.  Do not use 
liquid cleaners or aerosol cleaners.  
Use a damp cloth for cleaning. 

4.  Do not use this product near water, 

for example, near a bathtub, 
washbowl, kitchen sink, or laundry 
tub, in a wet basement or near a 
swimming pool. 

5.  Do not place this product on an 

unstable cart, stand, or table.  The 
product may fall, causing serious 
damage to the product. 

6.  Slots and openings in the cabinet 

and the back or bottom are provided 
for ventilation, to protect it from 
overheating.  These openings 
should never be blocked or covered.  
The openings should never be 
blocked by placing the product on 
the bed, sofa, rug, or other similar 
surfaces.  This product should never 
be placed near or over a radiator or 
heat register.  This product should 
not be placed in a built-in installation 
unless proper ventilation is provided. 

7.  This product should be operated 

only from the type of power source 
indicated on the marking label.  If 
you are not sure of the type of power 
supply to your home, consult your 
dealer or local power company. 

8.  Do not allow anything to rest on the 

power cord.  Do not locate this 

product where people will step on 
the cord. 

9.  Do not overload wall outlets and 

extension cords as this can result 
in the risk of fire or electric shock. 

10.  Never push objects of any kind 

into this product through cabinet 
slots as they may touch 
dangerous voltage points or short 
out parts that could result in a risk 
of fire or electric shock.  Never 
spill liquid of any kind on the 
product. 

11.  To reduce the risk of electric 

shock, do not disassemble this 
product, but take it to a qualified 
service contractor when some 
service or repair work is required.  
Opening or removing covers may 
expose you to dangerous 
voltages or other risks.  Incorrect 
reassembly can cause electric 
shock when the appliance is 
subsequently used. 

12.  Unplug this product from the wall 

outlet and refer servicing to 
qualified service personnel under 
the following conditions: 

A.  When the power supply cord 

or plug is damaged or 
frayed. 

B.  If liquid has been spilled into 

the product. 

C.  If the product has been 

exposed to rain or water. 

D.  If the product does not 

operate normally by following 
the operating instructions.  
Adjust only those controls 
that are covered by the 
operating instructions.  
Improper adjustments of 
other controls may result in 
damage and will often 
require extensive work by a 
qualified technician to 
restore the product to normal 
operation. 

Содержание 31331































Отзывы: