Bell Phones 31331, Руководство пользователя

Страница: 25 / 30

16
DE--REGISTER
You can purchase additional extra
handset to expand your DECT 6.0
phone system to maximum of Four
Handsets.
You only need to register (subscribe) the
handset if:
1. The Handset registration
(subscription) is disrupted and
the handset has lost link with
the base.
2. If you want to ADD or subscribe
an additional handset.
To register (subscribe) the handset to
the base unit, Reset the base power and
the base will be in “Registration Mode”
for 60 seconds. During this time you
must do the following to register
(subscribe) the handset.
1. Press the [MENU BUTTON]. Press
[SCROLL UP or DOWN BUTTON] to
scroll to select “REGISTER” and
press [OK BUTTON].
2. Use the [SCROLL UP or DOWN
BUTTON] to select the number of
base unit you would like to
subscribe the handset to (1 to 4).
The handset unit will start searching
for the base unit and when found it
will ask to enter the four digits “PIN
CODE”.
3. Enter the base PIN CODE (0000 –
which is the Factory Default PIN
CODE) and press [OK BUTTON]. If
the PIN CODE is wrong, the handset
will restart
searching for the base.
4. When the handset is registered, it
will show “HS” followed by the
assigned handset number.
MENU Function Programming 6
:
DE-REGISTER (HANDSET
DE-REGISTRATION to BASE)
:
> DE-REGISTER SUB-MENU
Information:
- PIN--_ _ _ _
(enter 4 digit Pin Code)
You can de-register, remove
(unsubscribe) from the base to allow
another handset to be registered.
1. Press the [MENU BUTTON].
Use [SCROLL UP or DOWN
BUTTON] to scroll to select “DE-
REGISTER” and press [OK
BUTTON].
2. Enter the base PIN CODE 0000
(which is the Factory Default PIN
CODE) and press [OK
BUTTON]. If the PIN CODE is
wrong, the handset will restart
searching for the base.
3. Enter the handset number (i.e.
HS 1 to 4 you want to remove
and press [OK BUTTON]. The
handset de registration is
successful when the handset
goes back to MENU mode. If it
not successful, it
will ask you to enter the handset
number of the handset you wish
to remove or de-register.
NOTE: You can only remove (de-
register) other existing “registered”
handsets on the base except the one
you are using during the de-
registration process.
De-registration feature can only be
used if your DECT 6.0 Phone has
two or more handsets that is
registered to the base (i.e. two,
three, four handset system).