Bell Phones 31331, Руководство пользователя

Страница: 15 / 30

6
01--12
NOTE : The call timer will start to count
once you press the [TALK BUTTON].
(Call Timer Display)
-----------------------------------------------------
FUNCTION FEATURES FOR TWO or
MORE HANDSET VERSION ONLY:
Intercom between Two Handset and
Call Transfer with an External Call:
NOTE: You can transfer the call from
one extension handset to the other
extension handset by using the Call
Transfer Feature.
This is optional function and feature for
Multi handset set up with two, three, and
four handset versions only.
Intercom Call:
1. In Standby mode, press [INT
BUTTON] followed by the other
handset number (HS 1 to 4).
2. The other handset will start to ring.
You can stop the ringing alert by
pressing the [TALK BUTTON] or the
[INT BUTTON].
3. If the other handset answers the call
by pressing [TALK BUTTON], you
can talk internally.
4. When you have finished with your
Intercom call, press the [OFF
BUTTON] to hang up or place the
handset on the base unit or on the
charger unit.
Conference Call:
1. At TALK Mode, Press [INT
BUTTON], Select the handset
number (HS 1 to 4) you wish to
transfer the phone call. The
selected extension handset will
beep to alert the extension
handset for Intercom call.
2. When the other handset takes
the line, you can talk internally
(via INTERCOM mode).
3. If you press the [INTERCOM
BUTTON] for 2 seconds, you
can then talk with the 2
nd
Handset and the external line at
the same time [CONFERENCE
CALL].
OR
4. Press the [INT BUTTON] again
to return to the internal call.
5. Press the “OFF BUTTON” to
hang up or place the handset on
the base unit or on the charger
unit.
------------------------------------------------
Pause Function:
In some cases, such as PBX or long
distance service, a pause may be
needed in the dialing sequence.
Press and HOLD the [PAUSE
BUTTON] on the handset inserts a
few seconds of delay between dialed
numbers. Pause(s) can be inserted
into the programmed dialing
sequence in memory dialing.
Mixed Mode Dialing (Temporary
Tone * Dialing):
If you only have PULSE Dialing
available in your area, accessing
special services (bank by phone,
etc.) require a tone signal. Ensure
that the TONE/PULSE setting is set
to PULSE. While in TALK mode,
press the Temporary TONE (*)
button and change setting from
Pulse to Tone dialing. Pulse dialing
mode resumes when the call is
ended.
Call Timer
(seconds)
Call
Timer
TALK Mode
indication