Bell and Howell 8000 Скачать руководство пользователя страница 96

Страница: 96 / 96

Copiscan 8000 Operator Manual

www.bbhscanners.com
1-800-SCAN-494 Sales

1-800-SCAN-495 Technical Support

SCSI (Small Computer System Interface) Connector.

Serves as one the interface between the

scanner and a host computer system.

Separation roller.

The lower feeder roller. This roller holds back all but the top document in the

stack of documents. This roller allows the skimmer module to feed a single document at a time
into the scanner.

Side access panel.

The door panel located on the left side of the feeder. It allows access to the

lamps and color filters.

Simplex scanner.

A scanner designed to scan a single side of a document as it passes through

the scanner.

Skew.

The result of feeding a document at an angle. It looks crooked on the display and also

looks this way when printed. To minimize skew, guide the document against the left document
feed guide.

Skimmer module.

The skimmer module is comprised of a skimmer body that is attached to the

rear feed rollers, the front skimmer rollers, and the associated bearings, pulleys and belt.

Transport system.

See Paper transport.

VRS.

VRS (VirtualReScan) is an electronic check-point for scanned images. As images pass

through the scanner, VRS performs a multi-point inspection of each document. VRS
automatically checks and adjusts for alignment (skew), brightness, contrast, and image clarity.

Содержание 8000
































































































Результаты поиска

Содержание 8000

Отзывы:

Похожие инструкции для 8000

Бренды по названию

Популярные бренды

Bell and Howell 8000, Руководство оператора

Результаты поиска

Содержание 8000

Отзывы:

Похожие инструкции для 8000

Бренды по названию

Популярные бренды