Copiscan 8000 Spectrum Operator Manual
1. Grasp the top of the side guides and gently slide them in the grooves.
2. Set the guides slightly wider than the width of the documents to ensure that the
documents do not bind on the guides. The document guides on the automatic feeder
tray should roughly match the setting of the guides on the exit tray.
3. If you are going to scan very short documents such as checks, slide the document stop
toward the transport exit.
Figure 23. Adjusting the Short Document Stop
Figure 24. Sliding out the Exit Tray Extension
4. If you are going to scan any documents longer than 11” (279 mm), slide out the
extension located in the middle of the exit tray to accommodate them.
NOTE:
If you need to scan documents that are 17”- 28” (432-711 mm) long, you may order the
Extended Exit Tray Part number 0123024.
41
www.bbhscanners.com
1-800-SCAN-494 Sales
1-800-SCAN-495 Technical Support
