Bell and Howell 2000 FB, Руководство пользователя

Страница: 43 / 71

5. Troubleshooting
32
IIIII
Push the Endorser in until it clicks,
and tuck the Endorser’s power cord
into the appropriate hook.
JJJJJ
Slide the protrusion on the bottom of
the cover into the output table, and
then push the cover closed.
Cleaning the Endorser
If paper scraps and dust accumulate in the
vicinity of the printing section of the En-
dorser, printing quality will be adversely
affected. If the printing section becomes dirty,
gently wipe the portion shown in white in
the illustration below with a dry, soft cloth.
Important
❒
Do not wipe any portion other than that
which is shown in white above. In addi-
tion, do not touch the printing section.
Doing so may get your fingers dirty, and
could damage the printing section.