Bell and Howell 2000 FB Скачать руководство пользователя | Manualshive

Страница: 21 / 71

background image

2. Setting up the Scanner

10

Connecting to the Host Computer

This scanner connects to a host personal
computer through a SCSI interface. This
section provides an overview of SCSI, and
explains how to connect the scanner to a host
computer.

What is SCSI?

“SCSI” (Small Computer System Interface)
is an interface standard that is used for high-
speed data transfer between a peripheral device
and a host computer.

•

In a SCSI connection, ANSI-compliant
SCSI cables are used to connect one or
more peripheral devices in daisy chain
fashion to the host computer.

•

Each device is assigned a unique SCSI
ID (0 to 7), which must be set for the
device before turning on the power and
before turning on the computer.

•

The last device in the daisy chain requires
a terminator.

1: SCSI cables

2: Up to 7 devices

3: Terminator

Important

❒

If two or more devices in a daisy chain
share the same SCSI ID, misoperation
and data loss may result. Set a unique
SCSI ID for this scanner that does not
duplicate the SCSI ID of any other de-
vice.

SCSI Connection Require-

ments for the Scanner

•

This scanner complies with the SCSI-2
standard. SCSI-1-compliant peripheral
devices can also be connected and used
with this scanner. The SCSI interface on
the scanner has a 50-pin half-pitch (pin
type) connector. Connect an ANSI-
compliant shielded SCSI-2 cable to the
scanner. Note that some combinations of
cables and SCSI boards will not work
together properly, so check this carefully.

•

If you are using a SCSI board and driver
software that supports SCAM, the SCSI
ID of this scanner will be set automati-
cally, so there is no need to set the ID. If
you are using a driver that does not have
a SCAM function, it will be necessary to
set the SCSI ID for the scanner if the
SCSI ID is identical to that of another
device that is connected.

•

The scanner’s terminator can be enabled
or disabled by turning a DIP switch on or
off.

«
...
19
20
21
22
23
...
»

Содержание 2000 FB








































































Отзывы:

Нет отзывов

Похожие инструкции для 2000 FB

IMAGE FORMULA DR-6010C

Бренд: Canon Страницы: 2

DR-X10C - imageFORMULA - Document Scanner

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 22

Бренд: Canon Страницы: 12

DR 5010C - imageFORMULA - Document Scanner

Бренд: Canon Страницы: 2

DR 2010C - imageFORMULA - Document Scanner

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 14

CP Printer Solution Disk Version 4

Бренд: Canon Страницы: 16

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 6

CanoScan LiDE 35

Бренд: Canon Страницы: 14

DR 5010C - imageFORMULA - Document Scanner

Бренд: Canon Страницы: 96

700F - CanoScan LiDE

Бренд: Canon Страницы: 19

Бренд: Radio Shack Страницы: 28

Бренд: Virbac Страницы: 2

Бренд: Tertium Страницы: 2

Бренд: Suzhou Hyco Information Technology Страницы: 13

XDM2525D-WU - DocuMate 252

Бренд: Xerox Страницы: 123

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды