35
N+ Wireless Modem Router
sections
table of contents
1
2
3
4
6
7
8
9
10
5
alTeRNaTe seTUP MeTHod
for static IP connection:
1 . IP assigned by IsP –
Select “No” if your ISP instructed you to
use fixed IP .
2 . IP address –
Enter an IP address assigned by your ISP for the
Router WAN interface .
3 . subnet Mask –
Enter a subnet mask assigned by your ISP .
4 . default gateway –
Enter a default gateway IP address assigned
by your ISP .
5 . VPI/VCI –
Enter your Virtual Path Identifier (VPI) and Virtual
Circuit Identifier (VCI) parameter here . These identifiers are
assigned by your ISP .
6 . encapsulation –
Select LLC or VC MUX your ISP uses .
Click “Apply Changes” to save and activate your settings . To go
back to the original settings before saving, click “Clear Changes” .
Or click any of the Quick-Navigation links for other options . Your
new settings will not be saved unless your click “Apply Changes” .
