20929_8820-00034_F6D4230-4_Enhanced_Router_User_Manual_111008
clean.doc
Page 15 of 114
Connect your wired (non-wireless) computers to these ports. These ports
are RJ45, 10/100 auto-negotiation, auto-uplinking ports for standard UTP
category 5 or 6 Ethernet cable. The ports are labeled 1 through 4.
I.
Connection to Modem – Yellow
This port is for connection to your cable or DSL modem. Use the cable
that was provided with the Router to connect the modem to this port. Use
of a cable other than the one supplied with the Router may not work
properly.
J. Reset Button – Red
The “reset” button is used in rare cases when the Router may function
improperly. Resetting the Router will restore the Router’s normal operation
while maintaining the programmed settings. You can also restore the
factory default settings by using the “reset” button. Use the restore option
in instances where you may have forgotten your custom password.
i. Resetting the Router
Push and release the “reset” button. The lights on the Router
will momentarily flash. The “router” light will begin to blink.