Belkin F5D9231-4 - G+ MIMO Wireless Router Скачать руководство пользователя страница 96

Страница: 96 / 101

G+ MIMO Wireless Router

sections

table of contents

InfORMaTIOn

fCC statement

deClaRaTIOn Of COnfORMITy WITH fCC RUles fOR eleCTROMaGneTIC COMPaTIbIlITy

federal Communications Commission notice

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules� These

limits are designed to provide reasonable protection against harmful

interference in a residential installation�

This equipment generates, uses, and can radiate radio frequency

energy, and if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications� However,

there is no guarantee that interference will not occur in a particular

installation� If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try and correct the interference by

one or more of the following measures:

•

Reorient or relocate the receiving antenna�

•

Increase the distance between the equipment and the receiver�

•

Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected�

•

Consult the dealer or an experienced radio/TV technician for help�

For IEEE 802�11b/g products in the USA market, only channels 1 through

11 can be operated� Selection of other channels is not possible�

This device and its antenna(s) must not be co-located or operating in

conjunction with any other antenna or transmitter�

We, Belkin International, Inc�, of 501 West Walnut Street, Compton, CA

90220, declare under our sole responsibility that the device,

f5d9231-4v1

complies with Part 15 of the FCC Rules� Operation is subject to

the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation�

Caution: exposure to Radio frequency Radiation

The device shall be used in such a manner that the potential for human

contact during normal operation is minimized�

This equipment complies with FCC radiation exposure limits set forth for

an uncontrolled environment� This equipment should be installed and

operated with a minimum distance of 20cm between the radiator and

your body�

Содержание F5D9231-4 - G+ MIMO Wireless Router






































































































Результаты поиска

Содержание F5D9231-4 - G+ MIMO Wireless Router

Отзывы:

Похожие инструкции для F5D9231-4 - G+ MIMO Wireless Router

Бренды по названию

Популярные бренды

Belkin F5D9231-4 - G+ MIMO Wireless Router, Руководство пользователя

Результаты поиска

Содержание F5D9231-4 - G+ MIMO Wireless Router

Отзывы:

Похожие инструкции для F5D9231-4 - G+ MIMO Wireless Router

Бренды по названию

Популярные бренды