50
G+ MIMO Wireless Router
sections
table of contents
1
2
3
4
5
7
8
9
10
6
UsInG THe Web-based adVanCed UseR InTeRfaCe
setting MaC address Control
The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the wireless network� Note: This list
applies only to wireless computers� This list can be configured so any computer attempting to access the wireless network that is not specified in the
filter list will be denied access� When you enable this feature, you must enter the MAC address of each client (computer) to which you want to allow
network access� The “Block” feature lets you turn on and off access to the network easily for any computer without having to add and remove the
computer’s MAC address from the list�
setting up an allow access list
1�
Select the “Allow” radio button
(1)
to begin setting up a list of
computers allowed to connect to the wireless network�
2�
Next, in the “MAC Address” field that is blank
(3)
, type in the MAC
address of the wireless computer you want to be able to access
the wireless network, then click “<<Add”
(4)
�
3�
Continue to do this until all of the computers you want to add have
been entered�
4�
Click “Apply Changes”
(5)
to finish�
(1)
(2)
(3)
(5)
(4)
