7
N Wireless Modem Router
sections
table of contents
1
3
4
5
6
7
8
9
10
2
PRodUCT oVeRVIeW
built-In dynamic Host Configuration Protocol (dHCP)
Built-In Dynamic Host Configuration Protocol (DHCP) on-board makes
for the easiest possible connection of a network . The DHCP server will
assign IP addresses to each computer automatically so there is no need
for a complicated networking setup .
setup assistant
The Setup Assistant, second generation of Belkin’s renowned Easy
Install Wizard, takes the guesswork out of setting up your Router . This
automatic software determines your network settings for you and sets
up the Router for connection to your Internet Service Provider (ISP) . In a
matter of minutes, your Router will be up and running on the Internet .
Note:
Setup Assistant software is compatible with Windows 2000, XP,
and Vista, Mac OS X v10 .4 and v10 .5 . If you are using another operating
system, the Router can be set up using the Alternate Setup Method
described in this User Manual (see page 27) .
Integrated N Wireless access Point
N MIMO is an exciting new wireless technology based on the draft IEEE
802 .11n specification . It employs MIMO (Multiple Input Multiple Output)
smart-antenna technology that achieves data rates of up to 300Mbps .*
Actual throughput is typically lower than the connected data rate and
will vary depending on your networking environment .
*NoTe:
The standard transmission rate—300Mbps—is the physical data
rate . Actual data throughput will be lower .
MaC address filtering
For added security, you can set up a list of MAC addresses (unique
client identifiers) that are allowed access to your network . Every
computer has its own MAC address . Simply enter these MAC addresses
into a list using the Web-Based Advanced User Interface and you can
control access to your network .
