32
N Wireless Modem Router
sections
table of contents
1
2
3
4
6
7
8
9
10
5
alTeRNaTe seTUP MeTHod
1 . User Name –
Enter the user name . (Assigned by your ISP) .
2 . Password –
Enter your password . (Assigned by your ISP) .
3 . Retype Password –
Confirm the password . (Assigned by your ISP) .
4 . service Name (optional) –
A service name is rarely required by an
ISP . If you are not sure if your ISP requires a service name, leave
this blank .
5 . IP assigned by IsP
1)
for the dynamic IP connection
– Select “Yes” if your ISP
instructed you to use Dynamic IP .
2)
for the static IP connection
– Select “No” if your ISP
instructed you to use Static IP .
– IP Address – Enter an IP address assigned by your ISP for the
Router WAN interface .
setting your IsP Connection Type to PPPoe or PPPoa
PPPoE (Point-to-Point Protocol over Ethernet) is the standard method of connecting networked devices . It requires a user name and password to
access the network of your ISP for connecting to the Internet . PPPoA (PPP over ATM) is similar to PPPoE, but is mostly implemented in the UK .
Select PPPoE or PPPoA and click “Next” . Then enter the information provided by your ISP, and click “Apply Changes” to activate your settings .
