PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc
Page 8 of 120
The Setup Assistant, second generation of Belkin’s renowned Easy Install
Wizard, takes the guesswork out of setting up your Router. This automatic
software determines your network settings for you and sets up the Router for
connection to your Internet Service Provider (ISP). In a matter of minutes, your
Router will be up and running on the Internet.
Note:
Setup Assistant software is compatible with Windows 2000, XP, and Vista;
and Mac OS X v10.x. If you are using another operating system, the Router can
be set up using the Alternate Setup Method described in this User Manual (see
page xx) [VERIFY PAGE NUMBER].
Integrated N+ Wireless Access Point
N MIMO is an exciting new wireless technology based on the draft IEEE 802.11n
specification. It employs MIMO (Multiple Input Multiple Output) smart-antenna
technology that achieves data rates of up to 300Mbps.* Actual throughput is
typically lower than the connected data rate and will vary depending on your
networking environment.
*
NOTE:
The standard transmission rate—300Mbps—is the physical data rate.
Actual data throughput will be lower.
MAC Address Filtering
For added security, you can set up a list of MAC addresses (unique client
identifiers) that are allowed access to your network. Every computer has its own
MAC address. Simply enter these MAC addresses into a list using the Web-
Based Advanced User Interface and you can control access to your network.