PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc1
Page 13 of 120
•
Belkin N+ Wireless Router
•
RJ45 Ethernet Networking Cable
•
Power
Supply
•
Belkin Setup Assistant Software CD
•
User Manual on the Setup Assistant CD
•
Network Status Display Guide
•
Wireless Security Setup Guide
Modem Requirements
Your cable or DSL modem must be equipped with an RJ45 Ethernet port. Many
modems have both an RJ45 Ethernet port and a USB connection. If you have a
modem with both Ethernet and USB, and are using the USB connection at this
time, you will be instructed to use the RJ45 Ethernet port during the installation
procedure. If your modem has only a USB port, you can request a different type
of modem from your ISP, or you can, in some cases, purchase a modem that has
an RJ45 Ethernet port on it.
[use existing lineart]
Setup Assistant
Belkin has provided our Setup Assistant software to make installing your Router
a simple and easy task. You can use it to get your Router up and running in
minutes. The Setup Assistant requires that your computer be connected directly
to your cable or DSL modem and that the Internet connection is
active and
working
at the time of installation. If it is not, you must use the “Alternate Setup
Method” section of this User Manual to configure your Router. Additionally, if you
are using an operating system other than Windows 2000, XP, or Vista, or Mac
OS X v10.x, you must set up the Router using the “Alternate Setup Method”
section of this User Manual.
[Please update from the final N+ QIG, PM00737]
Step 1: Hardware Connections
–
Follow the Quick Installation Guide (QIG)
[Insert line art from the QIG]
1.
Find the cable connecting your modem and computer*. Unplug it from the
computer and plug it into the yellow port on the Belkin Router.
2. Connect the new cable (provided in the box) to any gray port on the
Router. Plug the other end into a network (Ethernet) port on your
computer.
Ethernet
USB