37
Belkin
®
Secure 4/8 port KM Switch User Manual
SECTIONS
Table of Contents
1
2
3
4
5
7
aPPendICes
6
The loading utility communicates with the KM switch once the KM switch
has entered Administrative mode. Once the KM is connected, with
the loading utility correctly the utility GUI will say “KM Ready” and the
connected port will also appear as seen in figure 1 of Appendix B.
If the utility cannot communicate with KM switch, it will prompt “
KM not
ready
” and no communication port will appear.
Figure 4 –
Communication between KM and utility has been lost
To avoid this, ensure that the KM switch is connected via the mouse (not
keyboard) Console port on the KM Switch.
Put the KM switch in administrative mode as explained previously.
