Time Out Timer (TOT)
The purpose of TOT is to prevent any user occupy a channel for an extended period. If a
channel is busy, the time will be shorter. If the preset time expires, the radio will generate
beep and terminate transmission automatically. Via programming software, you can set TOT
as 15-495 second.
TX Permission
Digital Channel
This feature can restrict the channel if it is already in use you will be unable to transmit. There
are three options available: always, color code free, channel free, if choose always, whenever
press PTT key to transmit directly; If choose color code free, you will be unable to transmit on
the channel if the color code is already in use; If choose channel free, you will be unable to
transmit on the channel if it is already in use. If the channel is busy, press PTT key a warning
tone will sound.
Via programmable software to set it: Channels folder→Zone→a digital channel→TX Parameters
→Admit Criteria
Battery Saver
This function allows an idler radio to automatically enter battery saver mode, the mode will
extend battery service life, but response time may be delayed. You can set battery saver time
ratio as : 1:1、1：2、1:3、1:4, the time rate is smaller, the power saving more evidently. Via
programmable software to set it: General Setting folder→Battery Saver
Low Battery Warning
When your battery gets low, LED indicator glows red and with a warning tone:
“
Please
Charge
”
，please replace the battery or charge the battery in time. The radio will turn off
automatically while battery is too low.
Via programmable software to set it: General Setting folder→RX low battery internal
