Note: If you active power on password function via program software ,each time you turn on
transceiver, must be enter 6 digit password, while occur password error, the transceiver will restart
automatically and then input password again . When 3 times wrong in input password continuously,
after it transceiver must be kill, only reprogram it then device work normal. Please enable power on
password with due care.
Adjusting the volume
After the radio is power on, you can rotate the power switch/volume adjust keys to adjust
the volume level, rotate the knob clockwise to increase the volume, or rotate the knob anti-
clockwise to decrease the volume.
Selecting a Channel
Turn the channel selector knob to select channel 1 to 16, rotate the knob clockwise to
increase the channel number, or rotate the knob anti-clockwise to decrease the channel
number, while enable all tone alert ,handover channel will hear a channel number.
Note: If a channel is not programmed, the display appears：Un-programmed Channel and prompt
no channel, LED indicator flash red.
Selecting a Zone
The radio supports up to 16 zones, each with a maximum of 32 channels, 16 zones all
support up to 512 channels. You may select a desire zone through enter zone menu or
setting zone selection function to orange button, button 1 or button 2, then handover zone.
While enable all tone alert, select zone will hear a channel number.
Call
Each digital channel may preset a contact, the preset contact could be a private call
contact, a group call contact or an all call contact; To transmit press and hold down the
PTT key, LED indication glows red, speak into the microphone, hold the palm microphone
approximately 3 to 4 centimeters away from your mouth.
Note: While enable talk permit indication feature, if the channel available, press PTT key to transmit
will with a tone.
