1.
All Call
While the contacts type as group call, you can select the menu to view its ID or press PTT
to call.
2.
Manual Dial
You can manually input the private call number for calling or sending call alert , send
message ,device check, remote monitor ,device enable ,device disable.
3.
New Contact
You can add a private call contact to the contact list. When edit name, press
”
* ”
key to
delete, press
“
#
”
to switch input method, name input 16 characters at most; then input
number, the available number range is 1~16776415. After add a private call contact
successfully, on contacts list will show new contact.
Scan
1.
Scan On/Off
While current channel add scan list and the list contain 2 channels at least, you may
enable the feature. Scanning allows the device to search the scan list connected to the
current channel to locate qualified channel for receiving or voicing. During scanning,
the icon
“
”
flashes, when activities are detected on a channel, the radio will stay on
the channel to receive current activities, the icon
“
stop flashes. If you don
’
t want to
receive activities on the channel, press the programmed Nuisance Delete key to
remove the channel from the scan list temporarily. To exit the scanning process, enter
scan menu、 switch channel or press the programmed Scan key.
Note:
If the channel enables the feature “Auto Scan” via the programming software, switch to the
channel will enter scanning automatically;
