While select a contact as private call, a private call can view its detail、send call alert 、
send message、edit name or number 、 delete、send device check、disable or enable、
send remote monitor.
Call Alert： Call alert is used for prompting the private receiver; ask them respond to
transmitter if communication is available. While receiving call alert command the radio will
generate alert tone.
Device Check：This function can check if the target radio is active in the system while
don
’
t send any tone alert to the target radio. When the radio is available, the screen
displays: target radio has replied, while the radio is unavailable, the screen displays: fail!
Remote Monitor: Allow a user to send a "Remote Monitor" request to the target device
via menu. If the request is successful, you can enable the microphone of the target radio,
and monitor its activities. Only the target radio is set remote monitor decode, that enable
monitor its activities.
Device enable: Allow a user to send "Device enable" command to the target killed
device, to allow it to be used normally.
Device Disable: Allow a user to send "Device Disable" command to the target device
via menu. If the device is lost or stolen, a user can use this function to disable the device.
However, this device will continue monitoring air interface to receive its "Device Enable"
command.
Edit: Modify the number or name of a private call contact. Press
”
*
”
key to delete,
press
“
#
”
to switch input method, the available number range is 1~16776415, name input
16 characters at most.
Delete: Delete unwanted contacts from the address list, if private call contact is set as
channel default address or call number on one touch call, its unable to delete.
