Contacts
Functions and Operations
Contacts list can contain a maximum of 512 members, including private call,
group call, all call.
1. Group Call
（
）
While the contacts type as group call, you can select the menu to view its ID or
send message.
2. Private Call
（
）
While select a contact as private call, a private call can view its detail
、
send call
alert
、
send message
、
edit name or number
、
delete
、
send device check
、
disable or enable
、
send remote monitor.
● Call Alert
：
Call alert is used for prompting the private receiver; ask them
respond to transmitter if communication is available. While receiving call alert
command the radio will generate alert tone.
● Device Check
：
This function can check if the target radio is active in the
system while don’t send any tone alert to the target radio. When the radio is
available, the screen displays: target radio has replied, while the radio is
unavailable, the screen displays: fail!
● Remote Monitor: Allow a user to send a "Remote Monitor" request to the target
device via menu. If the request is successful, you can enable the microphone of
the target radio, and monitor its activities. Only the target radio is set remote
monitor decode, that enable monitor its activities.
● Device enable : Allow a user to send "Device enable" command to the target
killed device, to allow it to be used normally.
● Device Disable: Allow a user to send "Device Disable" command to the target
device via menu. If the device is lost or stolen, a user can use this function to
disable the device. However, this device will continue monitoring air interface to
receive its "Device Enable" command.
● Delete: Delete unwanted contacts from the address list, if private call contact is
set as channel default address or call number on one touch call, its unable to
delete.
12
