BelFone BelFone Series Скачать руководство пользователя

Страница: 50 / 52

1. The radio cannot be

powered on

Remove the battery and then reattach it.

Recharge or replace the battery.

During receiving, the

voice is week,

discontinuous or

totally inactive.

Increase the volume level.

Turn off the radio and reattach the antenna.

Check the battery voltage, if the voltage is low

please recharge or replace the battery.

3. The voice is unclear.

Modify the frequency to avoid be interrupted by

radios using the same frequency.

On analog channel, you can adjust the squelch

level or set CTCSS/CDCSS

The noise is too loud

Move towards other members.

Move to an open and flat area, and restart the

radio.

Stay away from equipment that may cause

interference.

You are cannot

communicate with

other members.

Set your TX/RX frequency and signaling to the

same as that of other members.

Move towards other members.

On digital channel, verity the device ID of

transmitter and receiver are the same.

GPS cannot locate

your position

Move to an open and flat area, and restart the

GPS feature.

Note: If the above solutions cannot fix your problems, or you may have some other

queries, please contact us or your local dealer for more technical support.

Содержание BelFone Series





















































Результаты поиска

Содержание BelFone Series

Отзывы:

Похожие инструкции для BelFone Series

Бренды по названию

Популярные бренды

BelFone BelFone Series, Руководство пользователя

Результаты поиска

Содержание BelFone Series

Отзывы:

Похожие инструкции для BelFone Series

Бренды по названию

Популярные бренды