background image

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Transmit no more than the rated duty factor of 

the Push-To-Talk (PTT) button. 

50 % of the time, or less, is important because this radio generates measurable RF energy 

exposure only when transmitting (in terms of measuring for standards compliance).

• Hold the radio in a vertica

parts of the radio, including the antenna) at least one inch (2.5 cm) away from the nose.   

Keeping the radio at the proper distance is important because RF exposures decrease with 

distance from the antenna.    Antenna should be kept away from eyes. 

• When worn on the body, always place the radio in approved clip, holder, holster, case, or 

body harness for this product. Using approved body

because the use of Belfone

result in exposure levels, which exceed the FCC’s occupational/controlled environment RF 

exposure limits. 

•  If you are not using a body

use position in front of the face, then ensure the antenna and the radio are kept at least 2.5 

cm (one inch) from the body when transmitting. Keeping the radio at the proper distance is 

important because RF exposures decrease with increasing distance from the ant

• Use only manufacturer’s name approved supplied or replacement antennas, batteries, 

and accessories. Use of non

accessories may exceed the FCC RF exposure guidelines.

 

For a list approved accesso

3

• Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push 

Talk (PTT) button. To receive calls, release the PTT button. Transmitting 

% of the time, or less, is important because this radio generates measurable RF energy 

exposure only when transmitting (in terms of measuring for standards compliance).

• Hold the radio in a vertical position in front of face with the microphone (and the other 

parts of the radio, including the antenna) at least one inch (2.5 cm) away from the nose.   

Keeping the radio at the proper distance is important because RF exposures decrease with 

the antenna.    Antenna should be kept away from eyes.   

• When worn on the body, always place the radio in approved clip, holder, holster, case, or 

body harness for this product. Using approved body-worn accessories is important 

Belfone’s or other manufacturer’s non-approved accessories may 

result in exposure levels, which exceed the FCC’s occupational/controlled environment RF 

If you are not using a body-worn accessory and are not using the radio in the intended 

ition in front of the face, then ensure the antenna and the radio are kept at least 2.5 

cm (one inch) from the body when transmitting. Keeping the radio at the proper distance is 

important because RF exposures decrease with increasing distance from the ant

• Use only manufacturer’s name approved supplied or replacement antennas, batteries, 

and accessories. Use of non-manufacturer-name approved antennas, batteries, and 

accessories may exceed the FCC RF exposure guidelines. 

For a list approved accessories please consult your local dealer for information.

% of the time. To transmit (talk), push 

To receive calls, release the PTT button. Transmitting 

% of the time, or less, is important because this radio generates measurable RF energy 

exposure only when transmitting (in terms of measuring for standards compliance). 

l position in front of face with the microphone (and the other 

parts of the radio, including the antenna) at least one inch (2.5 cm) away from the nose.   

Keeping the radio at the proper distance is important because RF exposures decrease with 

• When worn on the body, always place the radio in approved clip, holder, holster, case, or 

worn accessories is important 

approved accessories may 

result in exposure levels, which exceed the FCC’s occupational/controlled environment RF 

worn accessory and are not using the radio in the intended 

ition in front of the face, then ensure the antenna and the radio are kept at least 2.5 

cm (one inch) from the body when transmitting. Keeping the radio at the proper distance is 

important because RF exposures decrease with increasing distance from the antenna.   

• Use only manufacturer’s name approved supplied or replacement antennas, batteries, 

name approved antennas, batteries, and 

dealer for information.

 

 

Содержание BelFone Series





















































Отзывы: