BelFone BelFone Series Скачать руководство пользователя

Страница: 2 / 52

WARMING！

Any Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Compliance and Control Guidelines and Operating Instructions

To control your exposure and ensure compliance with the occupational/controlled

environment exposure limits always adhere to the following procedures.

Guidelines:

• Do not remove the RF Exposure Label from the device.

• User awareness instructions should accompany device when transferred to other users.

• Do not use this device if the operational requirements described herein are not met.

Operating Instructions:

Содержание BelFone Series





















































Результаты поиска

Содержание BelFone Series

Отзывы:

Похожие инструкции для BelFone Series

Бренды по названию

Популярные бренды

BelFone BelFone Series, Руководство пользователя

Результаты поиска

Содержание BelFone Series

Отзывы:

Похожие инструкции для BelFone Series

Бренды по названию

Популярные бренды