After Use
STEP 1:
Turn off the vacuum cleaner by pressing the power button.
STEP 2:
Switch off and unplug the vacuum cleaner from the mains power supply.
STEP 3:
Press and hold the cable rewind button until the power supply cord has
completely wound back into the cable drum.
Warning:
Hold onto the plug to guide the power supply cord back into the vacuum
cleaner. Failure to do so may cause damage to the vacuum cleaner or injury.
Emptying the Dust Container
Before emptying the dust container, switch off and unplug the vacuum cleaner from the
mains power supply. It is recommended to empty the dust container outdoors.
STEP 1:
Whilst securely holding the vacuum cleaner main unit, remove the dust
container by pushing the dust container release catch and pulling the dust container
away.
STEP 2:
Holding the dust container over a bin or refuse bag, pull the dust container
base release clip to open the dust container. Empty the dust container slowly and
carefully to reduce the amount of dust released back into the atmosphere. Shake the
dust container gently to dislodge any remaining dust.
STEP 3:
To close the dust container, push the base in until it closes and put the dust
container release catch back into position.
STEP 4:
Replace the dust container by pushing it into the vacuum cleaner main unit and
aligning the latch with the indent.
Warning:
Do not use the vacuum cleaner if the dust container is filled past the Max. fill
mark, as this could damage the unit or cause injury to the user.
7
