Cleaning the Exhaust Filter and Mesh Filter
The exhaust filter is located behind the right wheel on the vacuum cleaner main unit.
STEP 1:
To remove the exhaust filter and mesh filter for cleaning, rotate the removable
hub cap in an anticlockwise direction and pull it away from the wheel.
STEP 2:
Remove the exhaust filter and mesh filter from the exhaust filter housing.
STEP 3:
Shake off the exhaust filter and mesh filter until the majority of the dust has
been removed, then wash them under clean, warm water and allow to dry thoroughly.
STEP 4:
Once the exhaust filter and mesh filter have dried fully, put them back into the
exhaust filter housing and replace the removable hub cap, locking it back into place by
rotating it in a clockwise direction.
Warning:
Do not clean the exhaust filter and mesh filter using detergent. Always allow
the exhaust filter and mesh filter to air dry; never use external heat sources, such as a
radiator to dry them. Do not wring or twist the mesh filter as this will cause damage.
Storage
The floor brush can be positioned into the storage clip for easy storage. Check that the
vacuum cleaner is cool, clean and dry before storing in a clean, dry place.
9
