Using the Floor Brush
STEP 1:
Push the floor brush onto the end of the telescopic extension tube or the
suction hose neck if the telescopic extension tube is not being used.
STEP 2:
Select which position on the floor brush is required for the floor type by
pressing the switch forwards or backwards. Switching it forwards lifts the brushes for
use on carpet and switching it backwards lowers the brushes for cleaning hard floors.
STEP 3:
Carefully pull out the power supply cord until it is at a suitable length. Do not
exceed the red mark. Plug it into the mains power supply.
STEP 4:
Turn on the vacuum cleaner by pressing the power button; press the power
button again to switch off the vacuum cleaner.
Using the Brush/Crevice Tool
The crevice tool is ideal for removing dust and dirt from folds in fabrics, radiators,
corners, recesses and other places that are hard to reach. The brush tool is perfect for
cleaning shelves, cupboards and windowsills.
STEP 1:
Push the brush/crevice tool onto the end of the telescopic extension tube or
the suction hose neck if the telescopic extension tube is not being used.
STEP 2:
Select which attachment is to be used by rotating the head to either the crevice
or brush setting.
STEP 3:
Turn on the vacuum cleaner by pressing the power button. Press the power
button again to switch off the vacuum cleaner.
6
