Belden HIRSCHMANN SPIDER II, Руководство пользователя

Страница: 9 / 36

Installation SPIDER II
Release 07 10/2013
9

E marking
The labeled devices comply with the regulations contained in the following
European directive(s):
72/245/EWG, 2009/19/EG
Guideline for standardizing the regulations of member states relating to
radio interference from motor vehicles. Certified devices are marked with
an e1 type approval indicator.
Rule No. 10 of the Economic Commission for Europe (ECE): Devices with
a certification are labelled with the E type-approval mark.
Note:
For use in connection with a suitable type approved power supply
only.

FCC note
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference; (2) this device must accept any interference received,
including interference that may cause undesired operation.
Appropriate testing has established that this device fulfills the
requirements of a class A digital device in line with part 15 of the FCC
regulations.
These requirements are designed to provide sufficient protection against
interference when the device is being used in a business environment.
The device creates and uses high frequencies and can also radiate high
frequencies, and if it is not installed and used in accordance with this
operating manual, it can cause radio transmission interference. The use
of this device in a living area can also cause interference, and in this case
the user is obliged to cover the costs of removing the interference.

Recycling note
After usage, this device must be disposed of properly as electronic waste,
in accordance with the current disposal regulations of your county, state,
and country.