Belden HIRSCHMANN SPIDER II, Руководство пользователя

Страница: 7 / 36

Installation SPIDER II
Release 07 10/2013
7

Environment

Only operate the device at the specified ambient temperature
(temperature of the surrounding air at a distance of up to 5 cm from the
device) and at the specified relative humidity.

When you are selecting the installation location, make sure you
observe the climatic threshold values specified in the technical data.

Use the device in an environment with a maximum pollution degree
that complies with the specifications in the technical data.

The equipment is designed for in building installation only and is not
intended to be connected to exposed (outside plant) networks.

Qualification requirements for personnel
Qualified personnel as understood in this manual and the warning signs,
are persons who are familiar with the setup, assembly, startup, and
operation of this product and are appropriately qualified for their job. This
includes, for example, those persons who have been:

trained or directed or authorized to switch on and off, to ground and to
label power circuits and devices or systems in accordance with current
safety engineering standards;
 trained or directed in the care and use of appropriate safety equipment
in accordance with the current standards of safety engineering;

trained in providing first aid.

General safety instructions
This device is operated by electricity. You must follow precisely the
prescribed safety requirements for the voltage connections in this
document.
See “Supply voltage” on page 5.
Non-observance of these safety instructions can cause material damage
and/or injuries.

Only appropriately qualified personnel should work on this device or in
its vicinity. The personnel must be thoroughly familiar with all the
warnings and maintenance procedures outlined in this operating
manual.
 The proper and safe operation of this device depends on proper
handling during transportation, proper storage and assembly, and
conscientious operation and maintenance procedures.

Never start operation with damaged components.
 Only use the devices in accordance with this manual. In particular,
observe all warnings and safety-related information.
 Any work that may be required on the electrical installation may only
be carried out by personnel trained for this purpose.