Belden HIRSCHMANN SPIDER II, Руководство пользователя

Страница: 5 / 36

Installation SPIDER II
Release 07 10/2013
5
Safety instructions

Correct usage
Only use the device for those purposes specified in the catalog and in the
technical description. Only operate the device with external devices and
components that are recommended and permitted by the manufacturer.
The proper and safe operation of this product depends on proper handling
during transport, proper storage, assembly and installation, and
conscientious operation and maintenance procedures.

Supply voltage

The power supply inputs are designed for operation with safety extra-
low voltage. Solely connect SELV circuits with voltage restrictions in
line with IEC/EN 60950-1 to the supply voltage connections.

Use undamaged parts.

If you are operating the module with an external voltage, only supply
the system with a safety extra-low voltage in compliance with IEC/EN
60950-1.

Connect the ground connector before you set up the other
connections. When removing the connections, you remove the ground
connector last.

Relevant for North America: To be used in class 2 circuits.
The device may only be connected to a supply voltage of class 2 that
fulfills the requirements of the National Electrical Code, Table 11(b).

Relevant for North America: For use in Class 2 circuits
Use copper wire/conductors of class 1 60/75 °C or 75 °C or 90 °C
exclusively.

Relevant for North America
for devices certified for hazardous locations:
Power, input and output (I/O) wiring must be in accordance with
Class I, Division 2 wiring methods [Article 501-4(b) of the National
Electrical Code, NFPA 70] and in accordance with the authority having
jurisdiction.

Only switch on the device when the housing is closed.
CAUTION
ELECTRIC SHOCK
Solely connect a supply voltage that corresponds to the type plate of your
device.
Failure to follow these instructions can result in injury or equipment
damage.