Belden HIRSCHMANN OCTOPUS OS20 Series, Руководство пользователя

Страница: 21 / 46

Installation OCTOPUS OS20/OS24 Managed
Release 10 08/2017
21
1.5.3 Pin assignments
1.6 Display elements
After the supply voltage is set up, the device starts and initializes the
software. Afterwards, the device performs a self-test. During this process,
various LEDs light up. The process takes around 30 seconds.

Device state
These LEDs provide information about conditions which affect the
operation of the whole device.
M12 4-pin (“D”-coded) Pin Data PoE
1 TX+ Positive V
PSE
2 RX+ Negative V
PSE
3 TX − Positive V
PSE
4 RX − Negative V
PSE
M12 8-pin (“X”-coded) Pin 10/100 Mbit/s 1000 Mbit/s PoE
1 RX+ BI_DB+ Negative V
PSE
2 RX − BI_DB − Negative V
PSE
3 TX+ BI_DA+ Positive V
PSE
4 TX − BI_DA − Positive V
PSE
5 — BI_DC+ —
6 — BI_DC − —
7 — BI_DD − —
8 — BI_DD+ —
LED Display Color Activity Meaning
P
P1 Supply
voltage 1 Green Lights up Supply voltage is on
None Supply voltage is too low
P2 Supply
voltage 2 Green Lights up Supply voltage is on
None Supply voltage is too low
FAULT Signal
contact
Red None The signal contact is closed - it is not
reporting any detected errors.
Lights up The signal contact is open - it is reporting a
detected error.
1
2 3
4
1 8
2
3 6
7
4 5