Belden Hirschmann MACH104-16TX-PoEP Series, Руководство пользователя

Страница: 16 / 48

16
Installation MACH104-PoEP
Release 06 11/2013
The 10/100/1000 Mbit/s twisted pair port offers you the ability to connect
network components according to the IEEE 802.3 10BASE-T/100BASE-
TX/1000BASE-T standard.
This port supports:
 Autonegotiation
 Autopolarity

Autocrossing (if autonegotiation is activated)

1000 Mbit/s full duplex
 100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
 10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
Note: Some of these ports also support Power over Ethernet (PoE).
See “PoE ports” on page 17.
Delivery state: autonegotiation activated
The socket housing is electrically connected with the front panel.
The pin assignment corresponds to MDI-X.
1.6.2 100 Mbit/s F/O port
This port is an SFP slot.
100 MBit/s F/O ports enable the connection of terminal devices or
independent network segments in compliance with the IEEE 802.3
100BASE-FX standard.
These ports support:
 Full or half duplex mode
Default setting: Full duplex
1.6.3 1000 Mbit/s F/O port
This port is an SFP slot.
Figure Pin Function Ports with PoE support:
PoE voltage feed
1 BI_DB+ Minus terminal of the supply voltage
2 BI_DB − Minus terminal of the supply voltage
3 BI_DA+ Plus terminal of the supply voltage
4 BI_DD+
5 BI_DD −
6 BI_DA − Plus terminal of the supply voltage
7 BI_DC+
8 BI_DC −
Table 7: Pin assignment of a 1000 MBit/s TP interface in MDI-X mode, RJ45
socket - for PoE with the power supplied via the wire pairs transmitting the
signal
1
2
3
4
5
6
7
8