ECX-1U/2U INSTALLATION GUIDE
PX106483-EN REV A
Page 15 of 22
5
Install the connectors in the desired frame.
6
Slide the tray inside the housing and secure the internal strain relief.
Install the covers (if they are removed) and close the doors.
B. Distribution cable attachement on the rear door (optional)
NOTE:
The ECX 1U can only secure smaller or medium diameter cables on the rear door.
This method has the same installation steps as mentionned at
section 6.2.
1
Use the cable tie (7”) to secure the sub-unit cables together and the distribution cable to the rear door.
Follow the
step 2 to 5
of
section 7.2.
to complete the fiber routing.