ECX 1U/2U INSTALLATION GUIDE
PX106483-EN REV A
Page 20 of 22
10. ECX labeling
This section shows how to apply the provided I.D. labels onto the label card and how to access it within the housing.
10.1. I.D. label card access, position and removal
1
To access the label card, pull out the card and tilt it upwards.
2
(If needed) remove the card by pushing downwards.
10.2. Applying I.D. label
Select the desired I.D. label and apply the provided sticker on the label card from bottom to top as shown.
NOTE:
Surface should be cleaned properly before applying the I.D. label.
1U
2U
[3/6/12] I.D label ports
[8/16] I.D label ports
