background image

4.1 Installation

• 

Apply

 

to

 

the

 

nearest

 

authorized

 

service

 

agent

 

for

 

the

 

installation

 

of

 

your

 

product.

• 

Preparation

 

of

 

the

 

location

 

and

 

electrical,

 

tap

 

water

 

and

 

waste

 

water

 

installations

 

at

 

the

 

place

 

of

installation is under customer's responsibility. 

• 

Make

 

sure

 

that

 

the

 

water

 

inlet

 

and

 

discharge

 

hoses

 

as

 

well

 

as

 

the

 

power

 

cable

 

are

 

not

 

folded,

 

pinched or crushed while pushing the product into its place after installation or cleaning 

procedures. 

• 

Make

 

sure

 

that

 

the

 

installation

 

and

 

electrical

 

connections

 

of

 

the

 

product

 

are

 

performed

 

by

 

authorized service. Manufacturer shall not be held liable for damages that may arise from 

procedures carried out by unauthorized persons. 

• 

Prior

 

to

 

installation,

 

visually

 

check

 

if

 

the

 

product

 

has

 

any

 

defects

 

on

 

it.

 

If

 

so,

 

do

 

not

 

have

 

it

 

installed.

Damaged products cause risks for your safety.

4.1.1 Appropriate installation location

• 

Place

 

the

 

product

 

on

 

a

 

hard

 

and

 

level

 

floor.

 

Do

 

not

 

put

 

it

 

onto

 

a

 

carpet

 

with

 

high

 

pile

 

or

 

other

similar surfaces.

• 

When

 

the

 

washing

 

machine

 

and

 

dryer

 

are

 

placed

 

on

 

top

 

of

 

each

 

other,

 

their

 

total

 

weight

 

–when

 

loaded–

 

amounts

 

to

 

180

 

kilograms.

 

Place

 

the

 

product

 

on

 

a

 

solid

 

and

 

flat

 

floor

 

that

 

has

 

sufficient

load carrying capacity!

• 

Do

 

not

 

place

 

the

 

product

 

on

 

the

 

power

 

cable.

• 

Do

 

not

 

install

 

the

 

product

 

in

 

the

 

environments

 

where

 

the

 

temperature

 

falls

 

below

 

0

 

ºC.

• 

Leave

 

a

 

minimum

 

space

 

of

 

1

 

cm

 

between

 

the

 

machine

 

and

 

the

 

furniture.

• 

On

 

a

 

graduated

 

floor,

 

do

 

not

 

place

 

the

 

product

 

next

 

to

 

the

 

edge

 

or

 

on

 

a

 

platform.

•   

Do

 

not

 

place

 

heat

 

sources

 

such

 

as

 

Hobs,

 

Irons,

 

Ovens,

 

etc.

 

on

 

the

 

washing

 

machine

 

and

 

do

 

not

 

use

them on the product.

4.1.2 Removing packaging reinforcement

Tilt the machine backwards to remove the packaging 

reinforcement. Remove the packaging reinforcement by pulling the 

ribbon. Do not make this operation alone by yourself. 

4.1.3 Removing the transportation locks

Loosen

 

all

 

bolts

 

with

 

an

 

appropriate

 

wrench

 

until

 

they

 

turn

 

freely.

2  Remove the transport safety bolts by turning them slightly.

3  Insert the plastic covers in the bag containing the user manual to the openings on the rear 

panel.

A

CAUTION: 

Remove the transportation safety bolts before operating the washing machine! Otherwise, the 

product will be damaged.

C

Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again 

in the future.
Install the transport safety bolts in reverse order of the disassembly procedure.
Never move the product without the transportation safety bolts properly fixed in place!

7

 / EN

Washing Machine / User’s Manual

Содержание WTG721M1
































Отзывы: