Beko METPOINT UD01, Инструкция по установке и эксплуатации

Страница: 5 / 24

EN
Installation and operating manual
METPOINT
®
UD01 5
1.3. General safety instructions
NOTE Installation and operating manual
Before reading this manual, make sure that it refers to your device model. This document
contains important information and instructions for the safe operation of the device. Before
carrying out any work with or on the device, all specialist technical personnel ¹ must have
read this manual.
A copy of this installation and operating manual must be kept near the device where it is at
all times accessible to staff.
In addition to the instructions in this document, always comply with the statutory regulations
for machine operation, accident prevention and safety. This also applies to the use of
accessories and spare parts.
DANGER Insufficient qualification
Improper handling and operation of the device can result in serious or even fatal injury, and/
or damage to property.
•
All tasks described in this installation and operating manual must be performed by
specialist technical personnel
1
who meet the following criteria:
• Before carrying out any work with or on the device, all specialist technical personnel¹
must have read and understood the contents of this installation and operating manual.
It is the responsibility of the owner of the device to ensure that the above requirement is
complied with.
1
Specialist technical personnel
Specialist technical personnel are persons who, due to their professional qualification and knowledge in the field
of measuring, control and pneumatic technology, and their knowledge of the applicable statutory regulations,
guidelines and standards are in a position to foresee potential dangers in relation to the use of the device and who
are qualified to perform the tasks described in this manual. Special operating conditions (e.g. aggressive media)
require additional knowledge.
DANGER Operation of device outside limit range
If the specified limits are exceeded, there is a risk of device malfunction, potentially resulting
in injury and damage to materials.
• The device must only be operated for the intended purpose and within the permissible
limits specified on the type plate and in the technical data.