25
Heatless Desiccant Dryers
|
Instruction Manual
Servicing
Section 6:
Maintenance
Figure 6.1: Models 4 SCFM – 35 SCFM
Maintenance
Front Panel Removal
Models 4 SCFM – 35 SCFM
• See figure 6.1.
• Using a hex key remove screw from the front panel.
• Open from bottom, allowing top to drop out releasing the
panel entirely.
Tools required
• 4mm hex key
Important information.
Ensure shutdown and start-up procedures are followed
prior to carrying out any maintenance work on the
dryer.
The manufacturer will not accept responsibility for
physical injury, damage or delays caused by failure to
observe the instructions in this manual and manuals
provided with your equipment.
Please refer to Section 11-Spares Information.
Figure 6.2: Models 4 SCFM – 35 SCFM with front panel removed
Service Intervals
Pre Filter Element
Annually (6000 hrs)
Exhaust silencer
Annually (6000 hrs)
Cartridges
Every Two Years (12000 Hrs)
Valves
Every Four Years (24000 Hrs)