Beko DIN26220 Скачать руководство пользователя

Страница: 36 / 47

hours every time you press the

key.

4. Close the door of your machine

after setting the Delayed Start.

Once the delay time is over, the

selected programme will start

automatically.

Changing the settings while Time

Delay function is active

While the Time Delay function is

activated, you cannot make changes

in the washing programme, auxiliary

functions or the duration of delay

time.

Programme and auxiliary

functions cannot be set/changed

after the programme has started.

To cancel the Time Delay function

Open the door of the product Press

and hold the Programme Selection /

Programme Cancel keys for 3 seconds.

After the 3 - 2 - 1 countdown, 0:01

is displayed, close the door of the

product and wait for the draining

process complete. Draining is

completed in 2 minutes and the

machine gives an audible warning

when it is completed.

You can select and start a

new programme following

the cancellation of Time Delay

function.

Time Delay function cannot be set

after the programme starts.

Starting the programme

Close the door of your machine to

start it after selecting the programme

and auxiliary functions.

Your machine performs water

softening depending on the

hardness level of the supply

water. Washing time can change

while the programme is running

depending on the ambient

temperature where your machine

is installed, temperature of the

supply water and amount of the

dishes.

Pay attention not to open the door

of the machine when it is running.

There may be a rush of vapour

when you open the door of your

machine; be careful.

The machine will remain silent

in pause mode for some time

in order to remove the water in

the machine and on the dishes

completely and to have the water

softener cleaned, and then it will

resume running in drying mode.

Cancelling the programme

Open the door of the product Press

and hold the Programme Selection /

Programme Cancel keys for 3 seconds.

After the 3 - 2 - 1 countdown, 0:01

is displayed, close the door of the

product and wait for the draining

process complete. Draining is

completed in 2 minutes and the

machine gives an audible warning

when it is completed.

There might be residues of

detergent or rinse aid in the

machine and/or on the pieces

being washed depending on the

step the programme you have

cancelled was in.

Salt indicator ( )

Please check the salt indicator on

the display to see whether there is

adequate amount of softening salt

in the dishwasher or not. You need

to refill the salt reservoir with salt

whenever salt indicator appears on

the display of your machine.

Adjusting the water hardness

Содержание DIN26220
















































Результаты поиска

Содержание DIN26220

Отзывы:

Похожие инструкции для DIN26220

Бренды по названию

Популярные бренды

Beko DIN26220, Инструкция по эксплуатации

Результаты поиска

Содержание DIN26220

Отзывы:

Похожие инструкции для DIN26220

Бренды по названию

Популярные бренды