Beko DDS25841X, Руководство пользователя

Страница: 23 / 43

20
USA
C
Select Models:
Your machine performs water
softening depending on the
hardness level of the supply
water. Washing time can
change while the program
is running depending on the
ambient temperature where
your machine is installed,
temperature of the supply
water and amount of the
dishes.
C
Pay attention not to open the
door of the machine when it is
running. There may be a rush of
vapour when you open the door
of your machine; be careful.
C
The machine will be switched
off if no button is pressed
within 5 seconds after opening
the door while the machine is
running.
C
After the door has been
opened, if any button is pressed
within 5 seconds and the door
is closed, the selected program
resumes; otherwise, the
machine will be switched off.
Open the door after the
machine has been switched off,
press On/Off button and close
the door within 5 seconds. The
program will resume washing.
C
The machine will remain silent
in pause mode for some time
in order to remove the water
from the machine and on the
dishes completely and to have
the water softener cleaned, and
then it will resume running in
drying mode.
4. Close the door of your machine after
setting the Delayed Start. Once
the delay time is over, the selected
program will start automatically.
Changing the settings while Time
Delay function is active
While the Time Delay function is activated,
you cannot make changes in the washing
program, auxiliary functions or the duration
of delay time.
C
Program and auxiliary functions
cannot be set/changed after
the program has started.
To cancel the Time Delay function
Open the door of the product Press and
hold the Program Selection / Program
Cancel keys for 3 seconds. After the 3 -
2 - 1 countdown, 0:01 is displayed, close
the door of the product and wait for the
draining process complete. Draining is
completed in 2 minutes and the machine
gives an audible warning when it is
completed.
C
You can select and start a
new program following the
cancellation of Time Delay
function.
C
Time Delay function cannot be
set after the program starts.
6.6 STARTING THE
PROGRAM
Close the door of your machine to start it
after selecting the program and auxiliary
functions.