Beko DDS25841X, Руководство пользователя

Страница: 19 / 43

16
USA
6.1 KEYS
On/Off key
When you press On / Off key, indicator
lights illuminate on the display for ON
position. The lights turn off in OFF position.
Program Selection / Program
Cancel key
Press this key until the desired program
appears in the program indicator.
To cancel the running program open
the door of the product. Press and hold
the Program Selection / Program Cancel
keys for 3 seconds. After the 3 - 2 - 1
countdown, 0:01 is displayed, close the
door of the product and wait for the
draining process complete. Draining is
completed in 2 minutes and the machine
gives an audible warning when it is
completed.
Function keys
If you press any of the Function keys
during program selection or time delay
selection, an affirmative key signal will be
heard provided that the relevant function
is supported by the selected program.
Function will be deemed selected when the
indicator of the selected function is lit.
To cancel the selected function, keep the
function key pressed until the function
indicator disappears.
6.2 PREPARING THE
MACHINE
1. Open the door of the dishwasher.
2. Place the dishes in accordance with the
instructions in the user manual.
3. Make sure that the upper and lower
Wash Arms rotate freely.
4. Put adequate amount of detergent
into the detergent dispenser.
6.3 PROGRAM SELECTION
1. Press the On/Off button to turn on
your machine.
2. Check the Salt and Rinse Aid indicators
and add salt and/or rinse aid if needed.
3. Refer to the table of “Program Table”
to determine a washing program
suitable for your dishes.
4. Selected program will start when you
close the door of your machine.
C
The Energy Guide label and all
offical certifications are based
on ‘Normal’ soil-sensing cycle
as follows: If available on the
unit, the automatic detergent
detection feature should be
deactivated. Dishes should
be loaded with the upper
rack on its 2nd position and if
available third basket should
be removed. Tests should
be done without any rinse
aid in the rinse aid dispenser.
Depending on the amount of
water taken in preconditioning
cycle, calculated amount
of detergent according to
the definitions in the test
procedure should be inserted
into the detergent dispenser,
without detergent in prewash.
For optimal performance with
minimum energy consumption,
it is recommended to disable all
other auxilary options.